This custom kit includes 7 sheets of glitter HTV vinyl in the colors used in the Hibiscus design. Each sheet is 12" x 20" so you'll have left over vinyl for other projects! Colors included are: Silver Confetti, Green Holographic, Light Green Holographic, Neon Purple, Rainbow Aqua, Rainbow Yellow and Neon Coral.
Our commercial, professional quality heat transfer vinyl will work on 100% cotton, 100% uncoated polyester and poly/cotton blends.
Heat: 305° F
Pressure: Medium pressure 10‐15 seconds
Peel: Hot or Cold
Blade: 45° cutting blade
Can be hand iron applied
General application instructions:
Pre‐heat the heat press to the recommended temperature, cut design in reverse (mirror) and pre‐press the garment for 3‐4 seconds to remove moisture and wrinkles. Please note, due to the wide variety of fabric materials available, it is highly recommended that all materials be tested prior to going into production or layering.
For the best performance of our products, cover the pressed design with a non‐stick cover sheet (Teflon sheet) and re‐press for 2‐3 seconds. You can purchase a Teflon sheet under the Supplies section of this website.
General washing instructions:
Wait 24 hours before first wash, turn garment inside out, machine wash cold to warm with mild detergent, no bleach, no dry cleaning, tumble dry low heat.
Use 45 degree angle blade
Cut in reverse (mirror)
Heat press with medium and even pressure
Press for 15-20 seconds
Temperature 305 degrees Fahrenheit
Hibiscus anchor kit 
